SSG10 A2 Airsoft Sniper Rifle

Apart from 2 stainless steel pins and two springs, the whole trigger assembly is made 100% of CNC cut, hardened steel and aircraft grade aluminium parts.

It only contains 2 moving parts which results in a simple and therefore very durable system. So far we have not managed to break a single trigger box. This design was created in coorperation with Bulltrigger Ltd., a tuningpart company in Europe which is well respected by the sniper community.

Unlike other trigger systems, the piston sear drops straight down when the piston is being engaged. This gives you up to 10% more power.

The trigger is the most important contact point you have with the rifle and pulling the trigger is a very intimate moment for most shooters. Especially when it comes to sniping.

Your crosshair is on the target and you are ready to send it. You touch the trigger. You break the shot and your gun gives you instant feedback. Hit.

We wanted to improve this experience and we were bored by the fact that almost every sniper rifle on the market has the same old-style curved trigger that feels just...meh. We added a flat surface, sharp corners, and a crisp breaking point. We made it amazing.

Each SSG-10 comes with an individual serial number laser engraved into the lightweight Aluminium Receivers. Two glide rings make sure that the bolt pull is nice and smooth.

The cylinder is machined from stainless steel. The base is threaded so it doesn't come loose. Due to a superior manufacturing process, the cylinder is completely straight and doesn't bulge ensuring a smooth cylinder travel inside of the receiver.

The cylinder head with nozzle is machined from stainless steel. The thread has an optimal length to maximize cylinder volume without compromising durability. The Airflow Chamber on the inside ensures smoother and faster flow of compressed air during the shot while also guiding the aftermarket AirBrake pins securely into the nozzle. Also, the nozzle length is optimized for perfect and consistent BB placement inside of the hop up chamber contributing to the overall accuracy of the rifle.

The piston shaft is made of full CNC aluminium and is centered in the cylinder with two gliderings. The steel base increases the longevity over long periods of use. The seal cap fits the cylinder diameter perfectly and has been tested for seal in high as well as low temperatures. It is also AirBrake pin ready for all the techheads out there

One piece steel machined spring guide. You don't need to worry about it breaking or unscrewing. 13mm diameter spring standard for maximum spring return efficiency.

To ensure that the inner barrels always points in the exact same direction there is two additional stabilisers built in. One barrel spacer with O-rings on the outside and the inside is installed and also the endcap comes with an o-ring. Your BBs flight path with be consistent and accurate.

The hop up can be easily adjusted from the outside of the gun which makes it very convenient during the game. The CNC cut hop up arm is made of steel. Secondary machining ensures perfect fit. Unlike in a standard VSR-10, the stainless steel adjustment pin has a machined slot on both sides of the chamber for perfect alignment and to go against the typical VSR-10 right curve issue. Additionally, the chamber features 20 adjustment positions optimized for heavy BBs for precise adjustment.

By far the best accessory you could buy for the SSG24 is now included out of the box with the new SSG10. Due to the 90° angle, the bolt handle is much more comfortable to rack since there's plenty of space between the scope and the handle. When flipped down, the bolt handle has a low profile to make sure that you don't get tangled up when moving through the airsoft battlefield.

With the clear magazine you always know how many BBs you have left and if it's time to reload your rifle. There is nothing more frustrating than having the target in your crosshairs with an empty magazine in your gun. It is single stacked for optimal feeding of the BBs without jams.

The famous industry leading Maple Leaf 60° Autobot bucking is installed out of the box. Two stainless steel seal rings ensure perfect seal. The 6.01mm precision brass barrel is coated with anti-oxidation layer to prevent degradation of the inner surface. Crowned tip of the barrel is, of course, present for optimal airflow. Cuts on the barrel are optimized for the Maple Leaf bucking standard for superior AirSeal.

The SSG10 A2 comes with a SSG10-adapted Maple Leaf MLC-S1 stock that is packed with features like adjustable length, cheek rest, slots and QD sling mounts. It feels like a real gun, including the weight.